Motor protection thermistors PTC

Motor protection thermistors PTC 1.Any quantity is available 2.Best lead timeif possible 3.Reasonable price

1.range from TK30C to TK180C 2. 5C a interval between the controlled-temperature 3. small size,high sensitivity,long life

                  

 

Summary The product which carried out German DIN44081,DIN44082 standard, featured with high sensitivity and long life, the insulation strength is AC6KV , it can be used for explosion-proof motor for protection places which over-temperature, and it also can be single or many series match with motor protector using , The temperature-measuring terminal of the sensor shall be installed in where it supposed to be, lead-out wire shall be connected to signal input terminal of the motor protector, as soon as the temperature is approaching temperature rating of insulation, input resistance figure will reach action-valve value of the protector, so the protector will simultaneously cut off the power and the protection shall be realized.

 motor starting

 Colors of corresponding

 

Ctrl temp.TK	90	100	105	110	115	120	125	130
Color of	Green	Red	Blue	Brown	Blue	Grey	Red	Blue
Lead-out wire	Green	Red	Grey	Brown	Green	Grey	Green	Blue
Ctrl temp.TK	140	145	150	155	160	165	170	180
Color of	White	White	Black	Blue	Blue	Blue	White	White
Lead-out wire	Blue	Black	Black	Black	Red	Brown	Green	Red

Technical data the controlled temperatures range from Tk 60°Cto Tk 180 ,there is 5 °Cinterval between the controlled –temperature Tk according to our specification ,we also can produce one chips to six chips

 

MZ6120 DS 500 200 200 500

M sensitive components

Z positive termperture coefficient

6 controlled-tempreature type

120 Temperature of controlled-temperature point TK 120°C

D three chips  Z double chips E single chip V four chips  S six chips

S standard length of lead out wire  K special length of lead out wire

T The temperature-measuring terminal of ceramic pipe and other materials

metal pipe can’t be marked

500 200 200 500 standard length of lead out wire

 

Installation instruction The sensor is fixed with the parts which needed to temperature measuring (usually install in the windings),when you fix the sensor ,don’t beat it or squeeze it and also don’t give much tension to lead out wire ,lead out wire connect to motor terminal box , and must be used match with the motor protector ,then it can control motor which over –temperature Every chip of Sensor of three chips install in three -phase winding separately ,each phase install one chip Installation ,connecting wire ,problems and repairing ,pls refer MZ6 series of PTC temperature-controlled sensor

Application field of PTC Motor Protection Sensors / Thermistors         

      

Motor protection thermistors PTC